Take a look at this fantastic camper customisation project. We took this bus to our workshop and did a complete mechanical and structural inspection and then installed a camper interior. We then exported the bus to Antwerp and delivered the bus directly to the customer’s door in France.
- Stage 1: base model
- Stage 2: Inspection
- Stage 3: Mechanical improvement
- Stage 4: Structural improvement
- Stage 5: Camper interior work
- Stage 6: Finished camper interior
- Stage 7: Finished exterior
- Stage 8: Arrival in Europe
- Stage 9: Delivery to client
Stage 1: base model
Here are some pictures of this model before it arrived at our workshop. We requested extensive information and pictures of the bus so that the customer could make an informed decision about the purchase.
Stage 2: Inspection
After the customer decided to buy the bus, we did a complete inspection of the bus and found that we needed to make some technical improvements. Here is a short list of what we needed to do.
- Install new steering gear
- Open up and check the gearbox
- New shock absorbers
- New engine seals
- Improve sills
- New paint underneath
- New brake master cylinder
- Change various cables and hoses
Stage 3 : Mechanical improvement
Here are some pictures of the technical improvements we made. We had to remove the engine to change the seals and also have a look at the gearbox.
Stage 4 : Structural improvement
We also did some work on the sleepers and partially repainted the lower half of the bus.
Stage 5 : Camper interior work
After all this work was done, we started with the interior, fitting everything according to the customer’s wishes. Here are some pictures of this work.
Stage 6 : Finished camper interior
This coach has a table, camper bed, fridge and sink and tap so the client can really enjoy the summer in style. There is also a lot of storage space.
Stage 7 : Finished exterior
The exterior as well as the interior are complete and we are ready for export! We then loaded the van into a container and tied it down for shipping.
Stage 8 : Arrival in Europe
After a 25-day journey at sea, the bus arrives in Europe. These pictures are after customs clearance and VAT. Now the bus is in our warehouse and ready for collection.
Stage 9 : Delivery to client
The project is now finished. And we have delivered the bus to our customer, where he can now enjoy it for the summer.